Steps to Re-Sealing image

Steps to Re-Sealing

If your imprinted concrete is in good condition, then normally two coats of imprinted concrete sealer being applied with a sealing broom is all that will be required to leave the surface protected and looking as good as new.

 The steps are easy to follow

  • Power wash your imprinted concrete driveway or patio
  • Leave to throughly dry and ensure good weather is forecast prior to treating with imprinted concrete sealer
  • Apply two coats of imprinted concrete sealer (adding of smartseal anti slip additive is recommended) leaving at least 2 hours between coats.

By applying two coats of Smartseal 'Silk' finish imprinted concrete sealer it should be at least 3-5 years before any further sealing is required.

Generally if the imprinted concrete driveway or patio is in good condition the process is that simple, but if you require further information just watch our DIY video or please call our dedicated advice team on 01268 722505